In short: a haemostat (hemostat) is a locking forceps that clamps a blood vessel or holds tissue. It has two finger rings, a ratchet that holds the jaws closed, a box-lock joint and serrated jaws. Once a vessel is clamped, it can be tied off (ligated) or cauterised, and the haemostat is then released.
This article explains the instrument for readers who are new to it. For the full range of patterns, see our guide to haemostats and artery forceps.
What the name means
Haemostasis means stopping bleeding. A haemostat is the instrument that does this mechanically, by closing a vessel between its jaws. The same instrument is also called artery forceps or haemostatic forceps; see haemostat vs mosquito forceps vs artery forceps for the naming.
How a haemostat works
- Close: squeezing the finger rings brings the jaws together on the vessel or tissue.
- Lock: the ratchet engages step by step. Each step increases the pressure at the jaws and holds it there.
- Hold: the instrument stays clamped without being held, which frees the hand for the next step.
- Release: pressing the rings together and moving them apart sideways disengages the ratchet and opens the jaws.
The parts and why they matter
- Jaws: horizontal serrations stop the vessel or tissue slipping out. Fine jaws suit small vessels; heavier jaws suit larger vessels and tissue.
- Box lock: one half of the instrument passes through the other, which keeps the jaws aligned.
- Ratchet: holds the chosen pressure. The steps should engage firmly and release cleanly.
- Shanks and rings: longer shanks give more reach in a deeper field.
Sizes and shapes
Haemostats range from small mosquito forceps of about 100 mm to 125 mm up to long Pean patterns of 240 mm and more. Most patterns come with straight or curved jaws; see straight vs curved artery forceps. All are listed under Forceps and Clamps.
What a haemostat is not
A haemostat looks similar to a needle holder, but the two are not interchangeable. Needle holders have short, strong jaws made to grip a suture needle. A haemostat’s jaws are made to grip vessels and tissue. For the range of tasks, see what haemostatic forceps are used for.
Frequently asked questions
What is a haemostat used for?
It is used to clamp a blood vessel so that it can be tied off or cauterised, and to hold tissue during a procedure.
Why does a haemostat lock?
The ratchet holds the jaws closed at a set pressure, so the instrument stays in place without being held.
Is hemostat the same as haemostat?
Yes. Hemostat is the American spelling and haemostat the British spelling of the same word.
Looking for haemostatic forceps?
Browse the product ranges above or contact NAZMED SMS in Subang Jaya, Selangor, for a quotation: sales@smsindus.com or +60 3-8024 4401.




