Needle Holders: Parts, Patterns and Product Ranges

  • Blog
  • Needle Holders: Parts, Patterns and Product Ranges
SMS NEEDLE HOLDERS

In short: a needle holder (also called a needle driver) is a locking instrument that grips a suture needle so that it can be passed through tissue. Patterns differ in overall length, jaw size, jaw surface and handle type. On our site, needle holders are listed in four main ranges: surgical, dental, tungsten carbide (TC) and single use, plus micro needle holders in the ophthalmic range.

This guide is the starting point for our needle holder articles. Each section links to a more detailed guide.

What a needle holder does

The jaws close on the suture needle and a lock holds them shut, so the needle stays in position while it is driven through tissue and regrasped. A needle holder looks similar to artery forceps, but its jaws are shorter and built to grip metal; see needle holders vs forceps.

Parts of a needle holder

  • Jaws: the gripping surfaces. They may be smooth, serrated, cross-serrated with a central groove, or fitted with tungsten carbide inserts.
  • Joint: the pivot between the two halves.
  • Shanks: their length sets the reach.
  • Lock: usually a ratchet between the finger rings; plier-handle and spring-handle patterns use a catch at the handle.
  • Handles: finger rings, a plier handle or a spring handle.

For how these features differ between patterns, see needle holder design: jaws, handles and locks.

Common patterns

Pattern Listed length Described on our product pages as
Mayo-Hegar 150, 180 and 200 mm Cross-serrated with groove; used with larger, heavier needles
Crile-Wood 150 and 160 mm For small to medium needles; more delicate than Mayo-Hegar
Derf 125 mm Short jaws with delicate serrations; small needles
Webster 125 mm Smooth jaws; small needles and fine suture material
Mathieu 140, 170 and 200 mm Plier handle with a spring and a ratchet lock
Castroviejo 145 and 160 mm Spring-handle microsurgical needle holder, with catch

For the full list, see types of needle holders.

Where needle holders are listed on our site

Range What it lists
Needle Holder Forceps (Surgical Instruments) The largest range: Mayo-Hegar, Hegar, Crile-Wood, Derf, Webster, Halsey, Baumgartner, Mathieu, Castroviejo, Barraquer, Yasargil and others
Dental Needle Holders (Dental Instruments) Castroviejo (14 cm and 18 cm), Mathieu, Olsen-Hegar, Crile-Wood, Derf, Webster, Collier and others
Needle Holders TC (listed under Dental Instruments) Tungsten carbide patterns, including Mayo-Hegar, DeBakey, Ryder, Crile-Wood, Mathieu and Castroviejo TC
Single-use needle holders (Single Use Instruments) Single-use patterns, most listed as sterile, including Derf, Mayo-Hegar, Crile-Wood and Halsey
Micro Needle Holders (Ophthalmology Instruments) Castroviejo and Barraquer micro needle holders, with or without lock

Choosing a needle holder

Match the holder to the needle and suture size first, then choose the length, jaw surface and handle. See how to choose the right needle holder.

Checking quality

Jaw alignment, grip, ratchet action and joint movement can all be checked on arrival and after each reprocessing cycle. See five features to check in a needle holder.

Tungsten carbide needle holders

TC needle holders have tungsten carbide inserts in the jaws. For how they compare with standard stainless steel jaws, see our stainless steel vs tungsten carbide guide.

Single-use needle holders

Single-use needle holders are used for one procedure, and most are listed as sterile. For an example, see the single-use Derf needle holder guide.

Frequently asked questions

What is a needle holder used for?

It grips a suture needle and holds it locked so that the needle can be driven through tissue during suturing.

Is a needle holder the same as artery forceps?

No. They look similar, but a needle holder has shorter jaws made to grip a needle, while artery forceps have longer serrated jaws made to clamp vessels and tissue.

Which needle holder range should I look at first?

For general surgical patterns, start with Needle Holder Forceps. For tungsten carbide jaws, see Needle Holders TC; for dental patterns, Dental Needle Holders; for disposable instruments, the single-use range.

Need needle holders?

Browse the product ranges above or contact NAZMED SMS in Subang Jaya, Selangor, for a quotation: sales@smsindus.com or +60 3-8024 4401.

Leave A Comment

NAZMED SMS SDN BHD is a young and dynamic company based in Malaysia, specializing in the manufacturing and export of surgical, dental, medical, and orthopedic instruments.

Selangor D.E. Malaysia.
+60 16 234 0347

Join Nazmed up-to-date info

Subscribe to our newsletter

Sign up to receive latest news, updates, promotions, and special offers delivered directly to your inbox.
No, thanks
Powered by
X
×

Hello!

Click one of our contacts below to chat on WhatsApp

×