Why Stainless Steel Grade Matters in Surgical Scissors

  • Blog
  • Why Stainless Steel Grade Matters in Surgical Scissors
Why Stainless Steel Grade Matters in Surgical Scissors The Hidden Truth Behind Surgical Precision, Patient Safety, and Long-Term Instrument Value in Modern Healthcare

In short: “stainless steel” covers many different alloys. For surgical scissors, the grade of steel and how it is heat-treated affect how well the blades hold an edge, how well they resist corrosion through repeated reprocessing and how well they keep their alignment. Scissors for cutting tissue and sutures are normally made from hardenable martensitic stainless steel; the quality of heat treatment, grinding and finishing matters as much as the grade itself.

This article covers stainless steel in scissors specifically. If you are deciding between standard stainless steel scissors and scissors with tungsten carbide cutting edges, see the stainless steel vs tungsten carbide buyer’s guide.

Not all stainless steel is the same

Stainless steels are iron-based alloys containing chromium, often with carbon, nickel, molybdenum and other elements in different amounts. Chromium forms a thin protective oxide layer on the surface, which gives stainless steel its corrosion resistance. Changing the composition changes the properties: some grades can be hardened to hold a sharp edge, while others are softer but more resistant to corrosion.

The main stainless steel groups used in instruments

  • Martensitic stainless steel can be hardened by heat treatment. It is the usual choice for cutting and gripping instruments, including surgical scissors, because it can hold an edge while keeping adequate corrosion resistance.
  • Austenitic stainless steel resists corrosion very well but cannot be hardened in the same way. It is more often used for non-cutting parts and hollowware such as bowls and trays.
  • Precipitation-hardening stainless steel combines strength with corrosion resistance and is used in some instrument components.

International standards, such as ISO 7153-1 for metals used in surgical instruments, list suitable stainless steels. Buyers can ask suppliers which material an instrument is made from.

How steel grade affects scissors performance

Edge retention

Correctly hardened martensitic steel holds a sharp edge for longer, which reduces how often scissors need sharpening. Blades that dull quickly tend to chew or tear rather than cut cleanly.

Corrosion resistance

Scissors go through repeated cleaning and sterilisation. Poorly suited or poorly finished steel is more prone to staining, pitting and corrosion, which can make instruments harder to clean and inspect and shortens their working life.

Blade alignment and strength

Scissors depend on two blades meeting precisely along their length. The steel must be strong enough to keep that alignment under normal use; otherwise the blades can loosen, bend or stop meeting correctly.

Heat treatment and manufacturing quality

The grade alone does not decide quality. Heat treatment sets the hardness of the blades, and forging, grinding, joint setting and polishing determine how smoothly the scissors cut and how well the blades meet. Passivation and a good surface finish support the protective oxide layer. Even a suitable grade can perform poorly if these steps are not done well.

Care that protects the steel

Clean scissors promptly after use, keep the joint open during cleaning, avoid prolonged contact with saline and other chloride solutions, dry thoroughly and lubricate the joint before sterilisation. Inspect the cutting edges and alignment regularly, and only use scissors for the material they were designed to cut. Using fine dissecting scissors on wire or heavy material quickly damages the edge.

What to check when buying surgical scissors

  • The exact pattern, length, blade shape (straight or curved) and tip type (sharp/sharp, sharp/blunt or blunt/blunt).
  • The material information and the cleaning and sterilisation instructions supplied with the instrument.
  • Smooth action, clean cutting along the full blade and correct blade alignment.
  • Whether a tungsten carbide (TC) version suits frequently used patterns better. See the benefits of tungsten carbide surgical tools.

NAZMED SMS supplies a wide range of surgical scissors, including Metzenbaum, iris, ligature, bandage and plaster patterns, as well as TC versions in Scissors TC and the Tungsten Carbide Inserts range.

Frequently asked questions

Which stainless steel is used for surgical scissors?

Scissors used for cutting tissue and sutures are normally made from martensitic stainless steel, which can be hardened by heat treatment to hold a cutting edge.

Are all stainless steel surgical scissors the same?

No. Differences in steel grade, heat treatment, grinding and finishing can lead to noticeable differences in sharpness, edge retention, corrosion resistance and blade alignment.

Should I choose tungsten carbide scissors instead?

TC scissors have harder cutting edges that resist wear, which can suit frequently used patterns. Standard stainless steel scissors remain the practical choice for many uses. The stainless steel vs tungsten carbide guide compares the two.

Need surgical scissors?

Browse the product ranges above or contact NAZMED SMS in Subang Jaya, Selangor, for a quotation: sales@smsindus.com or +60 3-8024 4401.

NAZMED SMS SDN BHD is a young and dynamic company based in Malaysia, specializing in the manufacturing and export of surgical, dental, medical, and orthopedic instruments.

Selangor D.E. Malaysia.
+60 16 234 0347

Join Nazmed up-to-date info

Subscribe to our newsletter

Sign up to receive latest news, updates, promotions, and special offers delivered directly to your inbox.
No, thanks
Powered by
X
×

Hello!

Click one of our contacts below to chat on WhatsApp

×