+(60) 3 8024 4401

  +60 16 234 0347

  +(60) 3 8021 5894


  • Alibaba
  • Facebook
  • Twitter
  • Google+
  • Blogger
  • Youtube
  • Instagram

Dental Instruments / Crane Kaplan and Chisels >> Split Chisel 4 mm Curved

Split Chisel 4 mm Curved

Split Chisel 4 mm Curved

Nazmed SMS Malaysia offers the Dental Crane-Kaplan Instruments having range of Split Chisel 4 mm Curved made of premium quality stainless steel.

Art No: SMS-11-2210

Name: Split Chisel 4 mm Curved

Size: 4 mm


Spilit Chisel

Size: 4 mm

Dental Instruments



Tip Configuration


Size / Model / Figure

4 mm




Hollow Single - Ended


Mirror Polish Finishing

Instrument Type

Dental Chisels


Stainless Steel

Disposable or Reusable


Rusting Prevention

Passivation Processed


Ultrasonic Cleaned

Sterile or Non-Sterile


Latex or Latex-Free


Test Performed

Boil, Shape & Performance Test


Premium OR-Grade


Individually Packed in SMS Brand printed Poly-sleeve


Dental chisels designed to shape teeth during the restorative treatment of defects in tooth enamel and dentin. These chisels are typically a handheld, manual instrument with a very small flat blade including a cutting edge that is beveled on one side at the distal end and an integral handle. Dental operative chisels are used mainly to split tooth enamel, to smooth cavity walls, and to sharpen cavity preparations. Cutting edge of the instrument is at a right angle to the axis of the instrument and also Used for the planning or cleaving enamel.

Chisels Edge

This type of finishing line is used after periodontal surgery that result in long clinical crowns termination apically on the tooth structure. If a shoulder and bevel were to be created, and over prepared and probable pulpal exposure are likely.

Feather Edge Finish line

Feather edge or shoulderless crown preparation should be avoided because although they are conservative of tooth structure. They fail to provide adequate bulk at the margins, over contoured restorations often result from feather edge margins, because the technicians can handle the wax pattern without distortion, only by increase its bulk beyond the original contours.

A variation of the feather edge, the chisel edge or knife edge margin is formed when there is a large angle between the axial surfaces and the unprepared tooth.

Chisels Scalers

  • The chisel scaler, designed for the proximal surfaces of teeth too closely spaced to permit the use of other scalers.
  • It is usually used in the anterior part of the mouth.
  • It is a double - ended instrument with a curved shank at one end and a straight shank at the other.
  • The chisel is inserted from the facial surface.
  • The slight curve of the blade makes it possible to stabilize it against the proximal surface, whereas the cutting edge engages the calculus without nicking the tooth.
  • Instrument is activated with a push motion while the side side of the blade is held firmly against the tooth.

Ochsenbein Chisel

  • Small delicate bone removal chisel
  • Ideal for atraumatic removal of bone adjacent to teeth during crown lengthening
  • Used to remove interproximal bone.
  • Fine end also useful in elevating fractured root tips

 Wedelstaedt Chisel

  • It has a slight vertical curvature in its shank
  • Mesially and distally beveled

Triangular Chisel

  • Blade is triangular in shape with the base away from the shaft
  • Has a terminal cutting edge like straight chisel.


Straight Chisel

Mono angled chisel

Bin Angle chisel

Triple angle chisel

Straight Chisel

  • The straight chisel has a straight shank and blade, with the bevel on only one side.
  • Its primary edge is perpendicular to the axis of the handle.
  • Straight and angled chisel are used for splitting off unsupported enamel.
  • No bend in shank
  • Single beveled / triple beveled
  • Minimal accessibility
  • Used with push stroke or lateral scraping action.
  • They are single planed instruments with five possible cutting movement.
  • The cutting edge is one side only, with the bevel of the hand running at a night angle to the shaft.
  • Have a straight blade in line with the handle and shank.

Mono angle Chisel

  • Blade is shorter as compared to straight chisel.
  • Single angle in the shank to enhance convenience form.
  • Used with push stroke or lateral scraping action.

Bin Angle chisel

  • To angle in the shank.
  • Use to cleave or split.
  • Undermined enamel.
  • Reverse bevel instrument.
  • Bin - Angle chisel may have either a distal bevel or a mesial (reverse) bevel.
  • Instrument with three cutting motion: vertical, right and left.

Triple Angle Chisel

  • Usually used to flatten the pulpal floors.

Related Products